STANDARD DRAWING

Sr.No. No. of Technical Drawing Name of Technical Drawing
1 C.E./P&D-01 Standard Drawing for 33 KV Single Line Diagram for 33KV Independent Feeder.
2 C.E./P&D-02 Standard Drawing for Half/Back Clamp for X-Arm.
3 C.E./P&D-03 Standard Drawing for Danger Plate, Number Plate, Phase Plate & Fixing Clamp.
4 C.E./P&D-04 Standard Drawing for 11 KV Line Support with Earth Wire.
5 C.E./P&D-05 Standard Drawing for G.I. Pipe Earthing.
6 C.E./P&D-06 Standard Drawing for 11 KV Line V-Cross Arm for Use where Conductor of 50 mm2 or below is proposed.
7 C.E./P&D-07 Standard Drawing for Earth Rod 20 mm dia M. S. Cross Plate.
8 C.E./P&D-08 Standard Drawing for laying of 11 KV 3 Nos. Single Core Under Ground Cable.
9 C.E./P&D-09 Standard Drawing for supporting Structure for 33 KV Lighting Arrester.
10 C.E./P&D-10 Standard Drawing for M. S. Channel 100x50x6 - 1600 MM T-Off.
11 C.E./P&D-11 Standard Drawing for M. S. Channel 100x50x6 - 2200 (For H Pole-9M. PCC Pole Support).
12 C.E./P&D-12 Standard Drawing for M. S. Channel 75x40x6 - 2200 (For Fuse Unit-9M. PCC Pole Support).
13 C.E./P&D-13 Standard Drawing for M. S. Angle 50x50x6 - 2400 MM (For Earth Wire) For H Pole.
14 C.E./P&D-14 Standard Drawing for Plate Form For Placement of 6.3/10/16/20/25 KVA T/F(1 PH & 3 PH) on Single Pole.
15 C.E./P&D-15 Standard Design for Out Door Cable Trench.
16 C.E./P&D-16 Standard Design for 33 KV Switching Sub Station.
17 C.E./P&D-17 Standard Lay Out of 33 KV Switching Sub Station.